The serial number on this guitar is HKX293016 which means it was made in Taiwan in 2014.
It is in great condition with only some light scuffing here and there.
There are no major dents, dings or scratches.
As you can see from the pictures the truss rod cover is missing but I colored in the spots inside the truss rod cavity so it’s not very noticeable.
A cover can be purchased online but people seem to think they are made of gold.
Lol! The tremolo cavity cover plate was also missing when I received it so I purchased an aftermarket one that is not original to the guitar but works just fine.
It has upgraded locking Grover tuners.
I just did a complete set up by cleaning and oiling the fretboard.
I put a new set of Ernie Ball regular slinky 10 through 46 strings on it.
I adjusted the truss rod to the new string tension and the neck is perfectly straight.
It has a Wilkinson tremolo system on it which I adjusted properly and when used it achieves drop silence.
I adjusted the saddle heights for the best action
possible without any fret buzzing and it has great action.
I also adjusted the pick up heights for equal volumes when switching back-and-forth from one to another.
All the electronics work great with no crackling or popping when they are being used.
The tone knob is a push pull pot that splits the bridge coils.
The stand is not included in the price nor is it for sale.
PLEASE READ
Sometimes when people text me, they do not receive the text I send them back.
If you do not get a response from me by text, please give me a call instead.
Price is FIRM.
CASH in hand only.
General LOCATION is on map.
Text or call for ADDRESS.
I do not respond to CL EMAILS.
I WILL NOT MEET anywhere.
I do not SHIP or DELIVER.
I sell on a FIRST COME BASIS.
I’m not interested in TRADES.
I ALSO DO GUITAR WORK SUCH AS SETUPS AND MINOR REPAIRS.
If your strings are getting old and your guitar needs new ones don't just change them, get a setup! After you get a setup your instrument will be easier to play and sound better.
If you need your strings changed, fretboard cleaned, frets dressed, complete setups, repairs and replacement of electronics or replacement of other parts on your acoustic, bass or electric guitar then bring it to me.
However I am not a Luthier and don’t do woodwork, painting or fret replacements.
Please read on for prices.
STRING CHANGING
$10
“If you provide the strings.
”
Or you can choose to use ones that I have in stock to include electric, acoustic, and bass ones.
Prices for strings start out at $10 but may vary so please inquire for price and availability.
BASIC SETUP
THIS IS FOR A GUITAR THAT HAS A FIXED BRIDGE WITH NO INTONATION OR HEIGHT ADJUSTMENTS SUCH AS A ACOUSTICS.
$30
“If you provide the strings.
”
A basic setup consists of:
1.
Cleaning and oiling fret board.
2.
Oiling the tuners if needed.
3.
Replacing the strings.
4.
Adjusting neck tension.
5.
Tightening all screws and repairing any stripped holes.
6.
Cleaning and wiping down the whole guitar.
SETUP WITH A FIXED BRIDGE THAT HAS INTONATION AND HEIGHT ADJUSTMENTS SUCH AS A TUNE-O-MATIC OR STRING THROUGH BODY DESIGN.
$40
“If you provide the strings.
”
Consists of a BASIC SETUP plus.
1.
Setting the intonation.
2.
Adjusting the bridge height for easier playing action.
3.
Adjusting the pick up heights for proper volume control when switching from one to another.
SETUP WITH A NON FLOATING VIBRATO SUCH AS A BIGSBY OR FENDER SYNCHRONIZED
$50
“If you provide the strings.
”
Consists of a BASIC SETUP plus.
1.
Setting the intonation.
2.
Adjusting the bridge height and level.
“There will be a additional $5 charge for each spring if replaced or added.
”
3.
Adjusting the pick up heights for proper volume control when switching from one to another.
SETUP WITH A FLOATING OR LOCKING VIBRATO SUCH AS A FLOYD ROSE OR KAHLER
$60
“If you provide the strings.
”
Consists of the same things as a set up with the previously mentioned Non Floating Vibrato.
ALLOWED TIME
For a full set up it usually takes about 4 hours due to the wait times of fret board conditioning.
In order to do a thorough job I prefer to keep the instrument for at least 24 hours which allows me the proper amount of time to keep tweaking the guitar adjustments for the best outcome.
AVAILABILITY
I'm available most days of the week from 9 am to 9 pm to include weekends.
REPAIR AND REPLACEMENT PRICES MAY VARY DUE TO CIRCUMSTANCES AND CAN BE DISCUSSED BEFORE THE WORK IS DONE.
BLOCKING A TREMOLO
If you provide a proper block system, the guitar still has strings on it and you are getting a set up.
$20
Without the above mentioned.
$40
ACOUSTIC SADDLE WORK
Modify the existing saddle by shaving, shimming or slotting if you are getting a set up.
$10
Without a set up $20
Replacement if you provide the original part as a jig and this includes any required shaving and slotting of the part.
$30
Without a set up $40
D-TUNA
Installing without a blocking system.
$20
TREMOLO BLOCKING
To install the required blocking system if you provide the proper parts required along with a setup.
$20
Without a set up.
$40
FRET LEVEL AND DRESS
When this is done a set up on the guitar is required and included in the prices.
Acoustic guitar or bass.
$90
Electric guitar or bass with a fixed bridge.
$100
Electric guitar with a tremolo.
$110
Electric guitar with a floating tremolo.
$120
NUT WORK
Modify the existing part by shaving or slotting with a setup.
$10
Modifying the existing part by shaving or slotting without a set up.
$20
Replacement if you provide the part and the old part is still present.
This includes the required shaving and slotting of the part.
$30
Replacement if you provide the part in the old part is missing.
$40
PICKUPS REPLACEMENT
To change out pick ups with the same wiring diagram with a set up.
$40
Without a set up.
$60
If you want to change out pick ups with a different wiring diagram we will need to discuss the price.
SOLDERING COMPONENTS
For 1st component if you provide the part.
$20
Each additional component if you provide it.
$5
IF YOU ARE READING THIS AD ON CRAIGSLIST PLEASE CONTACT ME BY TEXT OR PHONE CALL FOR A FASTER RESPONSE.
Whatsapp
