The serial number on this guitar is 18121501372 which means it was made in 2018 in China.
It is pretty much an excellent condition with just one light scuff on the back that is so light I couldn’t capture in the pictures.
The guitar hasn’t been played much at all, and really shows no signs of wear anywhere.
I do not know the brand of the strings on it, but they 10 - 48 gauge and are in great condition.
if you read up about this guitar and from the pictures you can see it has a set of P 90 pick ups on it and it sounds very bluesy.
The fretboard is very clean and appears to have a light coat of oil on it.
When I purchase this guitar for resale, all I had to do is go over the guitar and tighten down all the hardware.
I adjusted the truss rod properly for the neck tension to the strings that were on it.
I also adjusted the bridge height for best playability, and it has really good action.
I set the intonation properly.
All the electronics work like new.
It comes with the case that has a key to lock it with and a
Epiphone manual.
The stand is not included in the price, nor is it for sale.
PLEASE READ
Sometimes when people text me, they do not receive the text I send them back.
If you do not get a response from me by text, please give me a call instead.
Price is FIRM.
CASH in hand only.
General LOCATION is on map.
Text or call for ADDRESS.
I do not respond to CL EMAILS.
I WILL NOT MEET anywhere.
I do not SHIP or DELIVER.
I sell on a FIRST COME BASIS.
I’m not interested in TRADES.
I ALSO DO GUITAR WORK SUCH AS SETUPS AND MINOR REPAIRS.
If your strings are getting old and your guitar needs new ones don't just change them, get a setup! After you get a setup your instrument will be easier to play and sound better.
If you need your strings changed, fretboard cleaned, frets dressed, complete setups, repairs and replacement of electronics or replacement of other parts on your acoustic, bass or electric guitar then bring it to me.
However I am not a Luthier and don’t do woodwork, painting or fret replacements.
Please read on for prices.
STRING CHANGING
$10
“If you provide the strings.
”
Or you can choose to use ones that I have in stock to include electric, acoustic, and bass ones.
Prices for strings start out at $10 but may vary so please inquire for price and availability.
BASIC SETUP
THIS IS FOR A GUITAR THAT HAS A FIXED BRIDGE WITH NO INTONATION OR HEIGHT ADJUSTMENTS SUCH AS A ACOUSTICS.
$30
“If you provide the strings.
”
A basic setup consists of:
1\.
Cleaning and oiling fret board.
2\.
Oiling the tuners if needed.
3\.
Replacing the strings.
4\.
Adjusting neck tension.
5\.
Tightening all screws and repairing any stripped holes.
6\.
Cleaning and wiping down the whole guitar.
SETUP WITH A FIXED BRIDGE THAT HAS INTONATION AND HEIGHT ADJUSTMENTS SUCH AS A TUNE-O-MATIC OR STRING THROUGH BODY DESIGN.
$40
“If you provide the strings.
”
Consists of a BASIC SETUP plus.
1\.
Setting the intonation.
2\.
Adjusting the bridge height for easier playing action.
3\.
Adjusting the pick up heights for proper volume control when switching from one to another.
SETUP WITH A NON FLOATING VIBRATO SUCH AS A BIGSBY OR FENDER SYNCHRONIZED
$50
“If you provide the strings.
”
Consists of a BASIC SETUP plus.
1\.
Setting the intonation.
2\.
Adjusting the bridge height and level.
“There will be a additional $5 charge for each spring if replaced or added.
”
3\.
Adjusting the pick up heights for proper volume control when switching from one to another.
SETUP WITH A FLOATING OR LOCKING VIBRATO SUCH AS A FLOYD ROSE OR KAHLER
$60
“If you provide the strings.
”
Consists of the same things as a set up with the previously mentioned Non Floating Vibrato.
ALLOWED TIME
For a full set up it usually takes about 4 hours due to the wait times of fret board conditioning.
In order to do a thorough job I prefer to keep the instrument for at least 24 hours which allows me the proper amount of time to keep tweaking the guitar adjustments for the best outcome.
AVAILABILITY
I'm available most days of the week from 9 am to 9 pm to include weekends.
REPAIR AND REPLACEMENT PRICES MAY VARY DUE TO CIRCUMSTANCES AND CAN BE DISCUSSED BEFORE THE WORK IS DONE.
BLOCKING A TREMOLO
If you provide a proper block system, the guitar still has strings on it and you are getting a set up.
$20
Without the above mentioned.
$40
ACOUSTIC SADDLE WORK
Modify the existing saddle by shaving, shimming or slotting if you are getting a set up.
$10
Without a set up $20
Replacement if you provide the original part as a jig and this includes any required shaving and slotting of the part.
$30
Without a set up $40
D-TUNA
Installing without a blocking system.
$20
TREMOLO BLOCKING
To install the required blocking system if you provide the proper parts required along with a setup.
$20
Without a set up.
$40
FRET LEVEL AND DRESS
When this is done a set up on the guitar is required and included in the prices.
Acoustic guitar or bass.
$90
Electric guitar or bass with a fixed bridge.
$100
Electric guitar with a tremolo.
$110
Electric guitar with a floating tremolo.
$120
NUT WORK
Modify the existing part by shaving or slotting with a setup.
$10
Modifying the existing part by shaving or slotting without a set up.
$20
Replacement if you provide the part and the old part is still present.
This includes the required shaving and slotting of the part.
$30
Replacement if you provide the part in the old part is missing.
$40
PICKUPS REPLACEMENT
To change out pick ups with the same wiring diagram with a set up.
$40
Without a set up.
$60
If you want to change out pick ups with a different wiring diagram we will need to discuss the price.
SOLDERING COMPONENTS
For 1st component if you provide the part.
$20
Each additional component if you provide it.
$5
IF YOU ARE READING THIS AD ON CRAIGSLIST PLEASE CONTACT ME BY TEXT OR PHONE CALL FOR A FASTER RESPONSE.
Whatsapp
